Wednesday, May 31, 2017

Make a Playmobil Cannon...That Really Fires!

Have you ever wanted to make your Playmobil cannons shoot with long range and high velocity?  It is nearly impossible with the standard configuration.  Fortunately, there is an easy way to equip your armies with this handy weapon.  This tutorial will show you how.

Step #1: Disassemble cannon
Step #1: Remove the cannon barrel from its carriage (the wooden part with wheels).  Disassemble the barrel by removing the breech (the little circular part in the top right of the picture).  This can be done by depressing the tabs on each side of the breech.  I used a Playmobil spear to avoid crushing the tabs.  Once the tabs are depressed, the breech can be easily removed, and with the breech removed, the plunger is also easily accessible.  The photo at left shows the barrel (far left), the plunger (center), and the breech (top right).

It is important to add a spring to this group of parts.  The spring will provide the mechanism to power the cannon.

Step #2: Insert plunger and spring.
Step #2: Return the plunger to its position inside the cannon barrel.  Now add the spring, dropping it down the barrel and around the plunger.  If you click on the picture to expand it, you may be able to see the spring in its position.  The breech is still unused, but we will add that in the next step.


Step #3: Reassemble cannon


Step #3: Carefully replace the breech over the plunger.  The cannon should now look exactly like it did before you started.  Replace the cannon back on its carriage and your project is all done!

To fire, load some ammo in the cannon's muzzle and pull back on the plunger.  Because the spring creates tension, the released plunger will fire the projectile quite a long way.  Of course, never shoot it at a person or animal.  Now your Playmobil armies have some artillery support...that really fires!




2 comments: